reset uconnect dodge journey 2013

Dodge Journey: How To Reset UConnect

If your Dodge’s infotainment screen or system is glitching or freezing out, don’t fret. Bad updates, overloaded memory, or temporary electrical issues can all cause the system to temporarily bug out.

Luckily, you can reset the UConnect system or the car’s electronics to remove the most common issues.

How to Reset UConnect in Dodge Journey

Ever since the second major release of UConnect, the system can be soft reset solely through the infotainment buttons on the console. You’ll need to turn on the vehicle, but it’s recommended to keep the engine off. Here’s what you need to do:

• Press and hold the “Volume” and “Tune” buttons on the infotainment system.
• Wait until the screen goes blank or displays the Dodge logo.
• Release the buttons and wait for a bit.
• The system should automatically restart, displaying the Dodge logo and other startup information.
• You can now use the infotainment system normally.

For the oldest version of UConnect, it’s best to turn off the car, wait a few minutes, then turn it on again.

In newer vehicles, you can also find a second option for soft-resetting the system:

• Press and hold the “Up” and “Down” arrows on the console (for climate controls). In some cars, you may need to press the “Phone” and “Mute” buttons at the bottom of the console.
• Wait until the “Engineering Menu” shows on the screen.
• Use the scroller on the screen to go to “Reset to factory settings.” You can also choose to reset the radio (“Reset radio”) only if that’s your primary concern.
• Select the option on the touchscreen, then hit “Yes” to confirm.

This option won’t work if the screen itself is unresponsive, but it completely removes previous settings and updates that may be messing with the system.

How to Reset a Dead Infotainment System

If the entire infotainment system is unresponsive and the screen is completely black, then it may have blown a fuse or another electrical component.

The fuse box for Dodge Journeys is typically located under the glovebox. It has a lid that opens by hooking one finger into the gap and pulling. The lid should also have a printed or etched fuse box plan inside.

You need to replace the 10A fuse in the second row of fuses (second on the right). Turn off the car before pulling the fuse and check it with a multimeter to ensure it’s actually blown. Consult the fuse plan on the lid or the owner’s manual to ensure you’re replacing the correct fuse.

If the fuse is not blown, put it back into the box and try to start the radio system. If that still doesn’t work, you may have a deeper electrical issue that warrants a professional inspection.

Reset the System by Draining the Car

As a last resort, you can remove the battery for the car and drain its electricity to hard reset the UConnect system:

• Open the hood.
• Remove the cables from the battery (starting with the negative).
• Honk the horn or turn on the headlights to drain the battery completely.
• Wait for a few minutes.
• Reconnect the battery cables (positive first this time).
• Start the car and check the infotainment system.

What If the Screen Is Different?

In some cases, resetting the system will change how your infotainment screen and options look. That’s because factory settings will likely revert UConnect to an older version with a different UI. Typically, leaving the car alone for a few minutes with an active internet or cellular connection will prompt it to download the latest UConnect version and fix the issue.

If this doesn’t happen, navigate to “Settings” on the screen and select “Software Update.” This option has been relocated on the display a few times on different UConnect versions and may also be named differently depending on the version. You can typically find the current version number at the bottom of the screen while the system boots. Check the UConnect website for the operating manual for that specific release.

Was this helpful?

Related posts:, 23 thoughts on “dodge journey: how to reset uconnect”.

This absolutely did not work

Doesn’t work

Same, did not work on my radio

My Dodge Journey Uconnect still down or no operationnal

It should be in your manual.

I have my manual and it says nothing

Did not work and this is very frustrating

did not work for my 2013 dodge journey sxt still can’t connect to bluetooth very sad

How do I preset radio station in 2015 dodge journey

Tried to reset my uconnect but the procedure I found did not work. Still uconnect is unusable. Haven’t been able to use my unconnected for over 2 years and yet Dodge wants to charge me over $200 to fix it because it’s supposedly the module. Dodge should add this problem as a defect. Angry, frustrated 🤬😡

I agree, we pay a lot of money for these options and I am tired of the vehicle industry just washing their hands of their responsibilities to their clientele.

I sold my 2019 dodge charger after 6 months because of this issue, I drive to much for something so trivial to irritate me every single day. Took it in multiple times to get it fixed and the dealer couldn’t/wouldn’t fix it.

That’s hilarious. Up here in Canada it cost me over $1000 to replace. Then it went out a couple of months later.

My 2015 Journey crossroad’s uconnect will not come on after I start the vehicle until a few miles down the road. this happens mostly during cold weather; vehicle is garage kept.

I found a loose connection in the back of my 8.4 uconnect screen that was loose which caused it not to come on or sometimes go out and back on. I pulled all connections apart sprayed some electrical cleaner on them and replaced the connection, haven’t had any more problems sense. Search on You-Tube for instruction on how to remove the device.

I NEED A “HARD” RESET!!! NOBODY GETS THIS??? WILL NOT WORK AFTER FIRESTONE REPLACED BATTERY!!!

Uconnect is GARBAGE. It got corrupted during the update process! NAV never worked since.

Same for me. Don’t know what I can do now, feel certain it’s software not hardware!

I have follow the steps but my dodge journey sxt 2016 uconnect is not connecting

2016 Dodge Journey USB works with IPOD, but not bluetooth. Smartphone connects to Uconnect via bluetooth with no problem, weird thing is, my 2013 Dodge Avenger has no problem via blue tooth with smartphone or Ipod.

I got my self a aux/bt wireless connector / adapter that I plug on the aux input under the armrest with USB power connect my phone and there we go.. Bye bye frustration go away.. Costs me 8 bucks…

I bought a rt model in germany not long ago, the same, total crap, I read everything possible, even about fuse 131,128, total shit, as written above, software sucks from 2012 to 2016 unconnect crap,

Well I have no hope now, having g same problem, I’m not paying for the to fix this bs, guess I just use my bt speaker in car smh

Leave a Comment Cancel reply

Uconnect Hard Reset Procedure | How to Reset Your Uconnect

While infotainment systems can be a massive benefit to today’s drivers, running into problems with this technology is all too common. Thankfully, there are a few easy things you can try at home to get your Uconnect system working again. Uconnect infotainment systems are found in all vehicles manufactured by Chrysler. That includes Dodge models as well as vehicles from Jeep and Ram. Take a look at the steps below to learn more about figuring out which version of the system you have, and finding the right directions to reset your version of Uconnect. If you’re unable to go through with the reboot, we encourage you to get in touch with some vehicle electronics experts to figure out the next steps to get your system back up and running as intended.

Finding Out Which Version of Uconnect You Have

There are many different versions of Uconnect out there, and it’s important to find out which version you’re working with before you attempt to do anything. Once you figure out which version you have, you’ll be able to look up specific instructions on how to restart the system. If you try resetting the system without knowing which version you’re working with, things can get confusing very quickly. With just this small amount of research, you will have a much easier time getting your infotainment system to work once again.

Search for Your Version – Jeep, Dodge, Ram, Chrysler Models

The easiest way to figure out which version of the system is in your vehicle is by looking up your model, model year, and trim level. For example, you might be driving a 2019 Ram 1500 Laramie. If that’s your vehicle, you can quickly find out that you have the fourth generation of Uconnect. Simply go to your preferred search engine, enter in your vehicle details followed by “Uconnect version,” and you should find the right information. Once you know which generation of the system you’re working with, you can look up the exact steps on how to reset it. In the following two sections, we’ll provide details on the latest Uconnect system – the fifth generation. If you need help with an older version, feel free to get in touch with us for assistance, or keep an eye out for additional guides on older models.

Soft Reset Steps

Before attempting a Uconnect hard reset, we recommend trying a soft reset. This will allow you to keep all of your saved data in the infotainment system, and can still take care of many problems that the technology encounters. In order to do a soft reset , first head to “Apps” and click on “Vehicle.” From there, go to “Settings,” and then down to “Reset.” There should be an option there that says something along the lines of “Soft Reset.” Click that, and voila – your system will restart itself. Give it some time, and hopefully, everything will start working as normal once again. If this doesn’t work for you, a hard reset will be the next thing you’ll want to try.

Hard Reset Steps

When you’re ready to attempt a hard reset, you’ll follow the same steps as above. Get to the Vehicle app, make your way into the Settings menu, and once again click on Reset. This time, you’re going to want to click on the “Factory Reset” option. The system will likely ask if you’re sure you wish to do this, so go ahead and confirm. Just be aware that you will lose all of your saved settings, and will likely have to re-pair your phone to the vehicle. Once you confirm, you’ll again need to give the vehicle some time. It may take a little longer than a soft restart, as the entire system is wiping itself clean to return to its factory settings.

When it is through, go ahead and attempt to do the things you would normally do with the system – play some music, set your phone up, and if there is a navigation system, give it a try. Hopefully, everything works correctly. If not, it is time to think about taking your vehicle to some experts, or possibly even think about replacing your system with an aftermarket upgrade. Whatever you decide, make sure to try both of these restart procedures first, and we’ve found that they can fix the vast majority of problems people run into with their infotainment systems.

Search for a Replacement System

If all else fails, it may be time to start shopping around to find a replacement for your Uconnect system. There are countless options out there, many of which are very easy to install and could even offer more features for your vehicle. Shop around at your favorite electronics store, online or in person. If you’re not sure exactly what to look for, consult with a professional, such as your regular mechanic or a salesperson at one of these outlets. They’ll be able to point out the infotainment system that best meets your needs, and fits within your budget. If you need any recommendations or are looking for a team that can install your next system, Ultimate Rides is here to help. We’re located an hour south of Chicago, and we specialize in customizing and upgrading vehicles for clients all across the globe. Give us a call soon and we’ll be happy to help.

Helpful Tools

We Ship Nationwide

We Ship our vehicles nationwide, if you have any questions just ask.

Get to Know Us

Starting with a few vehicles back in 2007, fast forward to selling only lifted trucks today.

Shop Ready Made Trucks

Check out some lifted trucks, built here at Ultimate Rides.

How to Reset Uconnect 4.3 Dodge Journey: Master the Art of Refreshing

If you own a Dodge Journey equipped with the Uconnect 4.3 infotainment system, you may occasionally encounter issues that require a reset. Resetting your Uconnect system can help resolve various problems such as frozen screens, unresponsive controls, or connectivity issues. In this article, we will guide you through the process of resetting the Uconnect 4.3 in your Dodge Journey.

Steps to Reset Uconnect 4.3

Before you begin the reset process, ensure that your vehicle is parked and turned off to prevent any accidental actions and to ensure your safety.

Step 1: Press And Hold The Mute And Phone Buttons

Start by locating the Mute and Phone buttons on your Uconnect 4.3 system. These buttons are typically located on the bottom row of the unit’s interface. Press and hold both buttons simultaneously for approximately 10 seconds.

A black screen with white text will appear, indicating that the system is entering the Engineering Menu. Keep holding the buttons until the Engineering Menu is fully loaded.

Step 2: Navigate To The Master Reset Option

Once the Engineering Menu is loaded, use the touch screen or physical controls to navigate through the menu options. Look for the “Master Reset” option and select it. This option may vary slightly depending on the software version of your Uconnect system.

Step 3: Confirm The Reset Process

After selecting “Master Reset,” a confirmation message will appear on the screen. Read the message carefully, as the reset process will erase all stored data and restore the system to its factory settings. If you are certain that you want to proceed, confirm the reset by selecting “Yes.”

Keep in mind that the reset process may take a few minutes to complete. Avoid turning off the ignition or disconnecting the power during this time.

Step 4: Wait For The Reset To Complete

Once you confirm the reset, the Uconnect system will begin the process. You will see a progress bar displayed on the screen, indicating that the reset is in progress. Wait patiently for the reset to finish.

It’s worth noting that during the reset process, your Uconnect system may reboot multiple times. This is normal and part of the reset procedure. Avoid pressing any buttons or interrupting the process.

Step 5: Reset Successfully Completed

Once the reset process is complete, your Uconnect 4.3 system will automatically restart. You will now have a freshly reset Uconnect system, which should help resolve any issues you were experiencing.

Remember to set up your preferences and connectivity options according to your needs after the reset. This includes pairing your smartphone, configuring audio settings, and any other personal preferences.

If you’re encountering problems with your Uconnect 4.3 system in your Dodge Journey, performing a reset can often help resolve these issues. By following the steps outlined in this article, you can easily reset your Uconnect system and get it back to its optimal functioning state.

Remember to exercise caution while performing the reset and avoid interrupting the process to ensure a successful reset. If you continue to experience issues with your Uconnect system even after the reset, it’s advisable to contact your authorized Dodge dealership or consult the Uconnect support for further assistance.

Frequently Asked Questions For How To Reset Uconnect 4.3 Dodge Journey: Master The Art Of Refreshing

How do i reset uconnect 4.3 in my dodge journey.

To reset Uconnect 4. 3 in your Dodge Journey, press and hold the VR and Phone buttons for 30 seconds.

Why Is It Important To Reset Uconnect 4.3 In My Dodge Journey?

Resetting Uconnect 4. 3 can help resolve issues with the system, such as freezing or lagging.

What Are The Benefits Of Resetting Uconnect 4.3 In My Dodge Journey?

Resetting Uconnect 4. 3 can improve system performance, fix glitches, and restore connectivity features.

Will Resetting Uconnect 4.3 Delete My Settings On My Dodge Journey?

No, resetting Uconnect 4. 3 will not delete your personal settings or saved preferences.

Related posts:

• How to Connect to Uconnect Dodge: Master Your Vehicle’s Connectivity
• How to Program Toyota Key Without Master : Master the Art of Key Programming!
• How to Master Adding Pictures to Uconnect from Phone
• Reset Uconnect Dodge Charger: Quick and Easy Steps

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Search forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

• 4.5 Gen (2019+ Ram HD)
• 4.5 Gen UConnect systems

Uconnect 5 Soft Reset/Reboot and Factory Reset Instructions

• Thread starter RamCares
• Start date Oct 20, 2021

RamCares Team

• Oct 20, 2021
• SOFT RESET/REBOOT - performs a cold reboot which completely restarts the radio and all peripheral devices in the radio.
• FACTORY RESET- *CAUTION: This action wipes saved user data from the radio and reverts everything back to factory default settings. (Presets, Favorites, Profiles, Paired Phones will be cleared). We recommend deleting and re-pairing any mobile devices after performing a factory reset. See instructions below.**
• Press and hold the "power button/knob" in for 10 seconds or more
• On Apple device Go to Settings>General>Carplay>Forget this Device.
• On Radio Go to Phone> Settings> Select Device in List and Delete the device.
• On the Phone, Go to Settings> Bluetooth> Unpair/Forget Existing "Uconnect" and duplicates.
• Ensure that your mobile phone's software and Uconnect software are both up to date. Then restart phone and pair again.
• Go to Settings > Screen Time > Content & Privacy Restrictions, tap Allowed Apps and ensure CarPlay is enabled.
• Go to Settings > General > CarPlay, tap your car, then tap Forget This Car. Then set up CarPlay again.

Well-Known Member

Good info to have, thanks for posting it, would be a great sticky  

The Mad Irishman

• Oct 21, 2021

Once @Admin @redriderbob get that UConnect5 forum online, it can be moved and stuck.  

Is the UC 5 available as an update, or is it a different hardware?  

Sponge60 said: Is the UC 5 available as an update, or is it a different hardware? Click to expand...

Thanks for the positive feedback! We've edited the post a bit to include re-pairing instructions, for your convenience. Feel free to share this information with your fellow Ram/ Uconnect 5 owners whenever you think it'd be helpful! It's good information to have in your back pocket. We appreciate all of you for making this an awesome community to be a part of! Ram Cares  

• Oct 23, 2021

Picked mine up yesterday and it’s super buggy. Freezes, doesn’t allow changing of the screens sometimes, changes pages on its own during phone calls, and flashes to a blank screen out of nowhere. Heard great things about it being fast too…. My system in my 2017 was smoother.. maybe it needs an update but 1st impression is not good. My 21 I could split the screen as well and have apple car play up top for nav and Sirius on the bottom half. Can’t find a way to do that yet.. hope my experience gets better  

obhitn3 said: Picked mine up yesterday and it’s super buggy. Freezes, doesn’t allow changing of the screens sometimes, changes pages on its own during phone calls, and flashes to a blank screen out of nowhere. Heard great things about it being fast too…. My system in my 2017 was smoother.. maybe it needs an update but 1st impression is not good. My 21 I could split the screen as well and have apple car play up top for nav and Sirius on the bottom half. Can’t find a way to do that yet.. hope my experience gets better Click to expand...

Oct 2, 2022 TSB 08-155-21 for Uconnect 5 Nav - 12” / 8.4”

RAM_Dad said: Maybe you need this update? Oct 2, 2022 TSB 08-155-21 for Uconnect 5 Nav - 12” / 8.4” (More info to follow. Just wanted to get this out there quickly) OVERVIEW: This bulletin involves inspecting the software level and updating the software if needed. The software will be updated from S21.8 to S21B.5. MODELS: 2022 (DJ) RAM 2500 Pickup 2022 (D2) RAM 3500 Pickup 2022 (DD) RAM 3500... hdrams.com Click to expand...

wolfmanwooley

Waiting for my 2022 to arrive and thought I would ask about the SIRI function. Basically can it be disabled completely? Had one at home and when it started joining conversations from the other room and playing back some previous conversations it was not included in I unplugged it. It really kinda creeps me out.  

wolfmanwooley said: Waiting for my 2022 to arrive and thought I would ask about the SIRI function. Basically can it be disabled completely? Had one at home and when it started joining conversations from the other room and playing back some previous conversations it was not included in I unplugged it. It really kinda creeps me out. Click to expand...

RAM_Dad said: Siri is a function of the phone connected, not UC5. Click to expand...

wolfmanwooley said: Thanks! I knew there was a reason I love my Android! Click to expand...

• Oct 28, 2021

Need to check my software version now. Found UC5 to be very buggy. Nav through CarPlay stops, screen flickers between different displays and when on a call it will change the audio between car speakers and phone audio as it chooses. Sent from my iPhone using Tapatalk  

Active Member

• Mar 15, 2022

Ram needs to make the APP more AFFORDABLE. This is the worst part of the truck. I can go to pretty much any other auto manufacture and get there app for free, if its not free, i get all the functions of the APP for cheaper then Rams Cheapest plan. It is very frustrating and ruins a lot of the tech that is on these trucks because we cant use it past the trial! I am not going to pay $30 a month for this crap, because that is how much they want for it in Canada for a fully loaded plan. Like what are they thinking? This needs to CHANGE!  

• Dec 27, 2022

RamCares said: Hello to our Ram Brand enthusiasts-- <redundant content removed> If you are experiencing concerns and a reboot of your Uconnect 5 system does not mitigate these concerns, please don't hesitate to send our team a private message with your VIN and any additional details/documentation that will help us get a better understanding of your situation Thanks, Ram Cares Click to expand...

Users who are viewing this thread

• Forum Listing
• Marketplace
• Advanced Search
• Dodge Vehicle Forums
• Dodge Journey Talk

2013 Uconnect problems

• Add to quote

I have been trying to reset my unconnect for about a year. Can not connect to Bluetooth at all. None of the suggested resets work. It is $200 an hour to take it to the dealership to try to fix. Has anyone found a way to fix this? Or found a good replacement radio? Extremely frustrated  

Julia515 said: I have been trying to reset my unconnect for about a year. Can not connect to Bluetooth at all. None of the suggested resets work. It is $200 an hour to take it to the dealership to try to fix. Has anyone found a way to fix this? Or found a good replacement radio? Extremely frustrated Click to expand...

DodgeCares said: Hi Julia515, Sorry this has been frustrating for you. What 2013 model do you have? Steph Dodge Cares Click to expand...

• ?            
• 291.5K members

Top Contributors this Month

• Remember me Not recommended on shared computers

Forgot your password?

• Audio, Infotainment Navigation, MyGig, UConnect, etc.

Radio reset

By hockey_puck April 23, 2019 in Audio, Infotainment Navigation, MyGig, UConnect, etc.

• Reply to this topic
• Start new topic

Recommended Posts

Hockey_puck.

Just found this on the Consumers Reports website.  Haven't tried nor likely will.  Might be useful to someone.

https://www.consumerreports.org/automotive-technology/how-to-reboot-your-cars-infotainment-system/

How to reboot your infotainment system (their headline)

FCA (Includes Dodge, Jeep, Ram)

Uconnect with 8.4-inch screen (2013-2019) • Put the car into accessory mode by hitting the ignition button but without having your foot on the brakes. This turns on the accessory systems of the car. Then hold the temperature up button (red) and the temperature down button (blue) simultaneously for at least 8 seconds. The engineering menu should appear. The last menu item on the first page is Reset Radio. This will reboot the system.

Uconnect (2013-2019) • Press and hold down the mute and source button for up to 10 seconds.

• 2late4u and jkeaton

Link to comment

Share on other sites.

• 3 years later...

One problem. There is no Mute button on the Dodge Journey setup. I've been searching forever to find a way to access the Engineering menu so I can do a Factory Reset on a radio I just got from Infotainment. It has this weird problem were the Nav system reboots roughly every 8 minutes. I just timed it to 7 minutes and 20 seconds. I need to do it again tomorrow to see if I get the same time between reboots. It's looking like some kind of software glitch. Too bad I can't find a way to download the software to refresh the system.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply
• Existing user? Sign In

More Forum Apps

• Online Users
• Leaderboard

|| Forum Activity ||

• All Activity
• Create New...

• Yekaterinburg
• Novosibirsk
• Vladivostok

• Tours to Russia
• Practicalities
• Russia in Lists

Rusmania • Deep into Russia

Out of the Centre

Savvino-storozhevsky monastery and museum.

Zvenigorod's most famous sight is the Savvino-Storozhevsky Monastery, which was founded in 1398 by the monk Savva from the Troitse-Sergieva Lavra, at the invitation and with the support of Prince Yury Dmitrievich of Zvenigorod. Savva was later canonised as St Sabbas (Savva) of Storozhev. The monastery late flourished under the reign of Tsar Alexis, who chose the monastery as his family church and often went on pilgrimage there and made lots of donations to it. Most of the monastery’s buildings date from this time. The monastery is heavily fortified with thick walls and six towers, the most impressive of which is the Krasny Tower which also serves as the eastern entrance. The monastery was closed in 1918 and only reopened in 1995. In 1998 Patriarch Alexius II took part in a service to return the relics of St Sabbas to the monastery. Today the monastery has the status of a stauropegic monastery, which is second in status to a lavra. In addition to being a working monastery, it also holds the Zvenigorod Historical, Architectural and Art Museum.

Belfry and Neighbouring Churches

Located near the main entrance is the monastery's belfry which is perhaps the calling card of the monastery due to its uniqueness. It was built in the 1650s and the St Sergius of Radonezh’s Church was opened on the middle tier in the mid-17th century, although it was originally dedicated to the Trinity. The belfry's 35-tonne Great Bladgovestny Bell fell in 1941 and was only restored and returned in 2003. Attached to the belfry is a large refectory and the Transfiguration Church, both of which were built on the orders of Tsar Alexis in the 1650s.  

To the left of the belfry is another, smaller, refectory which is attached to the Trinity Gate-Church, which was also constructed in the 1650s on the orders of Tsar Alexis who made it his own family church. The church is elaborately decorated with colourful trims and underneath the archway is a beautiful 19th century fresco.

Nativity of Virgin Mary Cathedral

The Nativity of Virgin Mary Cathedral is the oldest building in the monastery and among the oldest buildings in the Moscow Region. It was built between 1404 and 1405 during the lifetime of St Sabbas and using the funds of Prince Yury of Zvenigorod. The white-stone cathedral is a standard four-pillar design with a single golden dome. After the death of St Sabbas he was interred in the cathedral and a new altar dedicated to him was added.

Under the reign of Tsar Alexis the cathedral was decorated with frescoes by Stepan Ryazanets, some of which remain today. Tsar Alexis also presented the cathedral with a five-tier iconostasis, the top row of icons have been preserved.

Tsaritsa's Chambers

The Nativity of Virgin Mary Cathedral is located between the Tsaritsa's Chambers of the left and the Palace of Tsar Alexis on the right. The Tsaritsa's Chambers were built in the mid-17th century for the wife of Tsar Alexey - Tsaritsa Maria Ilinichna Miloskavskaya. The design of the building is influenced by the ancient Russian architectural style. Is prettier than the Tsar's chambers opposite, being red in colour with elaborately decorated window frames and entrance.

At present the Tsaritsa's Chambers houses the Zvenigorod Historical, Architectural and Art Museum. Among its displays is an accurate recreation of the interior of a noble lady's chambers including furniture, decorations and a decorated tiled oven, and an exhibition on the history of Zvenigorod and the monastery.

Palace of Tsar Alexis

The Palace of Tsar Alexis was built in the 1650s and is now one of the best surviving examples of non-religious architecture of that era. It was built especially for Tsar Alexis who often visited the monastery on religious pilgrimages. Its most striking feature is its pretty row of nine chimney spouts which resemble towers.

Plan your next trip to Russia

Ready-to-book tours.

Your holiday in Russia starts here. Choose and book your tour to Russia.

REQUEST A CUSTOMISED TRIP

Looking for something unique? Create the trip of your dreams with the help of our experts.