- Weill Cornell Medicine
Slips, Trips, and Falls: Understanding, Preventing, and Mitigating Risks
By Gian Joseph, Safety Advisor
As we enter the rainy and cold season, we face several risks , which include slips , trips, and fall s in our day-to-day activities. It is important t o be aware of hazards around us and learn how to properly identify and assess any risks with each step.
Slips, trips, and falls (STFs) are common accidents that can lead to severe injuries. These incidents occur in various settings, from homes and workplaces to public spaces , and i t is essential to understand the causes, consequences, and , most importantly, strategies for prevention and mitigation.
1. Understanding the Dynamics of STFs. STFs are caused by the following .
Insu fficient friction between the shoe and the walking surface. Common causes include wet or greasy floors, spills, and loose debris (Slip and Fall Accidents, 2021).
When a person's foot collides with an object or an uneven surface, it caus es them to lose balance. Typical trip hazards include cluttered walkways, electrical cords, uneven flooring, and damaged or upturned mats (Slip and Fall Accidents, 2021).
2. The Impact of STFs
Slips, trips, and falls have far-reaching effects, affecting individuals and society . Personal i njuries range from minor cuts , bruises, sprains , and abrasions to fractures, dislocations, and head injuries (National Safety Council, 2021). The medical expenses associated with treating STF-related injuries can be substantial , including hospital stays, surgeries, rehabilitation, and ongoing care (National Safety Council, 2021). STFs can result in missed workdays and reduced productivity for both individuals and employers. Workers' compensation claims and absenteeism contribute to economic costs (National Safety Council, 2021). Lastly, t he physical and psychological consequences of STFs can limit mobility, independence, and overall quality of life, especially among older adults ( Sahyoun et al., 2020).
3. Prevention and Mitigation Strategies
Preventing and mitigating STFs involves a combination of awareness, environmental modifications, and education . H ere are some ways you can take precaution s against STFs in your daily activities;
Clear Pathways: Maintain clear, unobstructed walkways by removing clutter and tripping hazards such as cords, toys, and loose rugs (Occupational Safety and Health Administration [OSHA], 2002).
Adequate Lighting: Ensure proper lighting in all areas, both indoors and outdoors, to improve visibility and reduce the risk of tripping over obstacles (OSHA, 2002).
Slip-Resistant Flooring: Install slip-resistant flooring materials, especially in areas prone to moisture, like bathrooms and kitchens (OSHA, 2002).
Footwear: Encourage the use of proper footwear with good traction, especially in environments where slip hazards are prevalent ( Sahyoun et al., 2020).
Handrails and Guardrails: Install and maintain handrails and guardrails on stairs, ramps, and elevated platforms to provide support and prevent falls (OSHA, 2002).
Warning Signs: Use signage to alert individuals to potential hazards, such as wet floors or uneven surfaces (OSHA, 2002).
Education and Training: Promote awareness and provide training to individuals on recognizing and avoiding STF hazards (National Institute for Occupational Safety and Health [NIOSH], 2015).
Workplace Safety: Employers should implement safety protocols and conduct risk assessments in the workplace, addressing potential STF risks (NIOSH, 2015).
Regular Maintenance: Routinely inspect and maintain buildings, walkways, and outdoor areas to identify and address potential hazards promptly (NIOSH, 2015).
4. A Holistic Approach to STF Prevention
Preventing and mitigating STFs require a collaborative approach involving individuals, organizations, and communities:
Individuals : Exercise caution when walking, especially in unfamiliar or potentially hazardous environments. Wear appropriate footwear and take your time, especially in wet or slippery conditions ( Sahyoun et al., 2020).
Employers: Create a safe work environment by identifying and mitigating STF risks. Provide training to employees on safety protocols and the proper use of equipment (OSHA, 2002).
Property Owners and Managers: Ensure properties are well-maintained and free from hazards. Regularly inspect and address issues promptly (NIOSH, 2015).
Government and Local Authorities: Enforce building codes and regulations that promote safety, especially in public spaces and commercial buildings (OSHA, 2002).
Conclusion
Slips, trips, and falls are preventable accidents that carry substantial personal, economic, and societal costs. By comprehending the causes, consequences, and prevention strategies, we can significantly reduce the incidence of STFs and mitigate their impact. Whether at home, at work, or in public spaces, prioritizing safety and fostering awareness about STFs is crucial for the well-being of individuals and communities. Let us strive collectively to create environments where everyone can move safely and confidently, free from the fear of falling.
References:
National Institute for Occupational Safety and Health (NIOSH). (2015). Preventing Slips, Trips, and Falls in Wholesale and Retail Trade Establishments. https://www.cdc.gov/niosh/docs/2015-100/pdfs/2015-100.pdf
National Safety Council. (2021). Injury Facts. https://injuryfacts.nsc.org/work/overview/work-safety-introduction/work-...
Occupational Safety and Health Administration (OSHA). (2002). OSHA Publication 3151-12R. Preventing Slips, Trips, and Falls in Wholesale and Retail Trade Establishments. https://www.osha.gov/Publications/osha3151.pdf
Sahyoun , N. R., Pratt, L. A., & Lentzner , H. (2020). The Changing Profile of Nursing Home Residents: 1985-1997. Journal of Aging and Health, 12(3), 336-363.
Slip and Fall Accidents. (2021). InjuryClaimCoach.com. https://www.injuryclaimcoach.com/slip-and-fall-accidents.html
Please note that the sources cited are accurate as of the time of writing this article. For the most current information, consult authoritative sources and local health authorities.
Go to the staff directory for individual contacts within EHS. You may also use the Weill Cornell Medicine online directory to search for faculty and staff.
Create an EHS Incident
Weill Cornell Medicine Environmental Health and Safety 402 East 67th Street Room LA-0020 New York, NY 10065 Phone: (646) 962-7233 Fax: (646) 962-0288
- Skip to main content
Disruptions to bin collections due to strike action
Slip and trip risk assessment template, about this publication .
It is important to raise awareness with staff and pupils to make sure they understand how they can help prevent slips and trips.
Use this Slip and trip risk assessment template to make sure all hazards are effectively controlled.
Publishing information
From: Health and Safety Team
Published: October 2014
Word: Slip and trip risk assessment template (Word doc) [73KB]
This file may not be suitable for users of assistive technology. If you need help to access this information within this file, please get in touch to request an accessible format .
Help us to improve this website
Members who experience issues submitting quarterly wage reports in UC Connection should try using their Chrome or Edge browsers. Please report ongoing issues to [email protected] as we continue investigating.
Slips, Trips, and Falls Inspection Checklist
Use this checklist to identify and address hazards that cause costly slip, trip, and fall injuries.
Slips, trips, and falls are a leading cause of workplace injuries in schools, so it’s essential that organizations stay vigilant and address potential hazards. Here’s a checklist to help you identify problems before they cause an accident or injury.
You'll need to log in to keep reading.
This information is exclusively for members with Workers' Compensation access.
- Risk Assessments
Risk Assessment Template Slips Trips and Falls
- Instant access
- Online editor
- Your business name
- Edit for 30 days
- PDF download
- 650+ documents
- Individual plans
- Your business logo
- Unlimited edits
- Fully branded
Document Description
Create your document in minutes with this ready to use Slips Trips and Falls Risk Assessment template. Use the quick and easy editor to add your details, make changes, and download a completed document branded with your business name.
This Slips Trips and Falls Risk Assessment has been created to assess the risks associated with slips, trips and falls from movement around the workplace.
The Slips Trips and Falls Risk Assessment will give you a good indication of the hazards that can contribute to slips, trips and falls, along with the risks and controls you should be thinking about.
The hazards that can create slips, trips and falls include uneven surfaces, obstructions and trip hazards, spillages, wet surfaces, poor flooring and lighting. Use this Slips Trips and Falls Risk Assessment to identify hazards involved with the activity, assess risk levels, and outline the controls needed to minimise risk.
You can use the Slips Trips and Falls Risk Assessment template as it is, in your business, and we will add your business name at the top of each page. The template is pre-completed as a ready to use example for the activity, you can edit it as much as you need to produce a site specific health and safety document for your projects or workplace.
This 6 page document includes:
- Assessment of Risk
- Significant Hazards
- Persons at Risk
- Control Measures
- Assessment of Remaining Risk
- Further Action Required
- Acknowledgement
How do I edit this document?
This Slips Trips and Falls Risk Assessment template can be edited online within your browser. Editing is quick and simple, but if you need more time, there's no hurry to finish your document today - you get 30 days use of the template and online editor to create your document.
When you complete your order, the document can be found in your account under 'Documents'. You can edit the document online from your HASpod account.
How do I download this document?
Download in PDF format for maximum compatibility across devices - no special software required. Once downloaded you can save, print and use your Slips Trips and Falls Risk Assessment document within your business for as long as you need it.
After making your edits, click the download button to get your PDF - we will add your business name in the header for you.
Get unlimited access to every document on the Documents Plan .
University of St Andrews
Current staff.
- Ask a question
- Data Warehouse
- Self Service
- Computer and IT support
- Money matters
- Policy and governance
- Professional and personal development
- Staff wellbeing
- Student administration
- Tech and administrative services
Slips, Trips and Falls
Introduction, actions by heads.
- Further information
Over a third of all major injuries reported to the Health and Safety Executive (HSE) each year are caused as a result of a slip or trip at work. This makes slips, trips and falls the single most common cause of injuries in workplaces. Slips and trips also account for over a half of all reported injuries to the public. It is therefore very important that Heads of Schools/Units put in place appropriate management systems to eliminate or minimise the risks of these hazards.
Detailed guidance on managing slips and trips in the Education Sector can be found in the HSE publication entitled Preventing Slips and Trips in the Education Sector (PDF, 55 KB)
The Head of the School/Unit should ensure that:
- An appropriate risk assessment is carried out for the risks of slips, trips and falls in their School/Unit and is recorded.
- The risk assessment includes all necessary control measures to eliminate or minimise the risks of slips, trips and falls in their School/Unit
- All relevant staff are made aware of the risk assessment.
- The annual School/Unit workplace health and safety inspection checklist includes a section on slips, trips and falls hazards.
Further Information
- Preventing Slips and Trips in the Education Sector (PDF, 55 KB) - Health and Safety Executive. HSE Books (EDIS2(rev1)) (2006).
- Preventing Slips and Trips at Work (PDF, 68 KB) - HSE Books(INDG 225 (rev1)) (2005).
- Slips and Trips: Guidance for employers on identifying hazards and controlling risks - HSE Books (HSG 155) (ISBN: 0 7176 1145 0 ) (1996)
- Slips and Trips: Guidance for the food processing industry - HSE Books (HSG 156) (ISBN: 0 71... ) (1996)
Return to Codes and Guidance - Index
Return to Environmental, Health and Safety Services - Home Page
Return to University of St. Andrews Homepage ( University )
Preventing Slips and Trips in the Education Sector (PDF, 55 KB)
Preventing Slips and Trips at Work (PDF, 68 KB)
- Skip to main content
- Skip to site information
- Departments
Language selection
- Français
Scheduled maintenance - Thursday, July 12 at 5:00 PM EDT
We expect this update to take about an hour. Access to this website will be unavailable during this time.
Prevention of Slips, Trips and Falls
On this page, how do falls happen, how to prevent falls due to slips and trips, what can you do to avoid falling at work.
Statistics show that the majority (67%) of falls happen on the same level resulting from slips and trips. The remaining 30% are falls from a height. This document will summarize information on "falls on the same level" (slips and trips). Falls from an elevation, such as falls from ladders, roofs, down stairs or from jumping to a lower level, etc., is discussed in other documents since each type of fall must be assessed as part of a fall prevention program .
Slips happen where there is too little friction or traction between the footwear and the walking surface. Common causes of slips are:
- wet or oily surfaces
- occasional spills
- weather hazards
- loose, unanchored rugs or mats
- flooring or other walking surfaces that do not have the same degree of traction in all areas
Trips happen when your foot collides (strikes, hits) an object causing you to lose balance and, eventually fall. Common causes of tripping are:
- obstructed view
- poor lighting
- clutter in your way
- wrinkled carpeting
- uncovered cables
- bottom drawers not being closed
- uneven (steps, thresholds) walking surfaces
Both slips and trips result from unintended or unexpected change in the contact between the feet and the ground or walking surface. This fact shows that good housekeeping, quality of walking surfaces (flooring), selection of proper footwear, and appropriate pace of walking are critical for preventing fall incidents.
Housekeeping
Good housekeeping is the first and the most important (fundamental) level of preventing falls due to slips and trips. It includes:
- cleaning all spills immediately
- marking spills and wet areas
- mopping or sweeping debris from floors
- removing obstacles from walkways and always keeping walkways free of clutter
- securing (tacking, taping, etc.) mats, rugs and carpets that do not lay flat
- always closing file cabinet or storage drawers
- covering cables that cross walkways
- keeping working areas and walkways well lit
- replacing used light bulbs and faulty switches
Without good housekeeping practices, any other preventive measures such as installation of sophisticated flooring, specialty footwear or training on techniques of walking and safe falling will never be fully effective.
For more information about effective housekeeping, visit the OSH Answers document on Workplace Housekeeping - Basic Guide .
Changing or modifying walking surfaces is the next level of preventing slip and trips. Recoating or replacing floors, installing mats, pressure-sensitive abrasive strips or abrasive-filled paint-on coating and metal or synthetic decking can further improve safety and reduce the risk of falling. However, it is critical to remember that high-tech flooring requires good housekeeping as much as any other flooring. In addition, resilient, non-slippery flooring prevents or reduces foot fatigue and contributes to slip-prevention measures.
In workplaces where floors may be oily or wet or where workers spend considerable time outdoors, prevention of fall incidents should focus on selecting proper footwear. Since there is no footwear with anti-slip properties for every condition, consultation with manufacturers is highly recommended.
Properly fitting footwear increases comfort and prevents fatigue which, in turn, improves safety for the employee. For more information on footwear visit the OSH Answers document on Safety Footwear .
You can reduce the risk of slipping on wet flooring by:
- taking your time and paying attention to where you are going
- adjusting your stride to a pace that is suitable for the walking surface and the tasks you are doing
- walking with the feet pointed slightly outward
- making wide turns at corners
You can reduce the risk of tripping by:
- keeping walking areas clear from clutter or obstructions
- keeping flooring in good condition
- always using installed light sources that provide sufficient light for your tasks
- using a flashlight if you enter a dark room where there is no light
- making sure that things you are carrying or pushing do not prevent you from seeing any obstructions, spills, etc.
- Fact sheet last revised: 2023-03-28
School operations
Slips, Trips and Falls Prevention
- 1. Ongoing management of slips, trips and falls prevention
- 2. Identifying and assessing slip, trip and fall risks and hazards
- 3. Controlling the risks
- 4. Hazard, incident and near miss reporting
This policy:
- outlines the health, safety and wellbeing requirements relating to the prevention and management of slips, trips and falls in schools
- supports the implementation of the department’s leadership commitment to health, safety and wellbeing (PDF) External Link .
Slips, trips and falls can place employees at risk of injury including sprains, strains, fractures and soft-tissue injuries.
This policy does not cover situations that involve working at heights of 2 metres or above (measured from the soles of your feet to the ground) or circumstances where a person could fall into a hole, trench or pit. Refer to the Prevention of Falls when Working at Heights policy for this information.
Roles and responsibilities in preventing slips, trips and falls
Under the Occupational Health and Safety (OHS) Act 2004 (Vic) External Link , managing the risk of slips, trips and falls is a shared responsibility between the department, the principal and/or their delegate and school employees.
- The department must maintain, so far as is reasonably practicable, a safe and healthy working environment for employees to avoid injuries from slips, trips and falls while working.
- The principal and/or their delegate, in consultation with the health and safety representative (HSR) and employees, must identify, assess and control the risks that are associated with slips, trips and falls.
- School employees must take reasonable care for their own health and safety and the safety of others who may be affected by their actions or omissions while at work, which includes managing slips, trips and falls.
Safety is a shared responsibility, and everyone including students has a role to play.
Key requirements for schools to prevent and manage slips, trips and falls
Schools must:
- consult with school staff and HSRs to identify, manage and prevent slip, trip and fall hazards
- identify slips, trips and falls hazards through observation, workplace inspections and incident reports
- assess new or complex hazards using a risk assessment
- report and manage incidents when they occur
- ensure that staff undergo appropriate training
- incorporate slips, trips and falls risk prevention into an ongoing management approach that promotes health, safety and wellbeing.
The Slips, Trips and Falls Procedure (in the Procedure tab) contains detailed, step-by-step information about how schools can meet these key requirements.
Department supports for schools
Central and regional offices provide a range of supports and services to assist principals and employees to be safe and well. These include access to the OHS Advisory Service and regional OHS support officers who can provide free advice in relation to managing slips, trips and falls.
Related definitions
Slips Slips occur when a person’s foot loses traction with the ground due to unsuitable footwear or walking on surfaces that are highly polished, wet or greasy.
Trips Trips occur when a person’s foot catches on an object or surface. In most cases people trip on low obstacles that are hard to spot such as uneven edges in flooring, loose mats, open drawers, untidy tools or electrical cables.
Falls Falls (under 2 metres) can result from a slip or trip but many occur during falls from low heights such as steps, stairs, and curbs, or falling into a hole, ditch or water.
Related policies
- Employee Health Safety and Wellbeing
- Managing and Reporting School Incidents (including emergencies)
- OHS Consultation and Communication
- OHS Planning
- OHS Risk Management
- Records Management — School Records
- Workers Compensation
- Workplace Inspection
Relevant legislation
- Compliance code: Workplace amenities and work environment External Link
- Occupational Health and Safety Act 2004 (Vic) External Link
- Occupational Health and Safety Regulations 2017 (Vic) External Link
Reviewed 24 June 2022
- Print whole topic
Policy last updated
24 June 2022
- School councils
OHS Advisory Service
Contact | Subscribe | Media centre
- Lifting, pushing and pulling
- Psychosocial hazards
- Working at heights
- Crystalline silica and silicosis
Managing health and safety
- Identify, assess and control hazards
- Safety data sheets
- Personal protective equipment
- Emergency plans and procedures
- Incident reporting
Industry and business
- Construction
- Small business
- Agriculture
- Gig economy
The Commonwealth, states and territories regulate and enforce WHS laws.
Find your Regulator
Model WHS Laws
We created the model WHS laws in 2011.
- Model WHS Act
- Model WHS Regulations
- Duties under Model WHS laws
- Codes of Practice
- Legislation
WHS laws in your jurisdiction
Contact your regulator
Data and Research
We collect, analyse and publish data and information on work health and safety and workers' compensation.
See our data
- Work-related fatalities
- Work-related injuries
- Work-related diseases
- Return to Work
- Explore our data
- About our data
- Industry benchmarking
- Research by industry or topic
See our latest Key work health and safety statistics
explore our data
Workers' Compensation
We develop national policy and strategy about workers' compensation.
- Workers’ compensation
- Comparing workers' compensation in Australia
- National Return to Work Strategy
- Deemed diseases
- Permanent impairment
- Workers' compensation for psychological injury
Read the Strategy
Resources and Publications
We publish a wide range of resources covering many work health and safety topics.
- Codes of practice
- Video and audio
- Corporate publications
Media centre
- Media releases
- News update
Read our Codes of Practice
read the codes
Slips, trips and falls
Each year slips, trips and falls cause thousands of preventable injuries.
- Safety by topic
The most common ones are:
- musculoskeletal injuries (injuries to muscles, nerves, tendons, joints, cartilage and spinal discs)
- dislocations.
More serious injuries and deaths can also happen.
Slip, trip and fall hazards
Some things that can cause you to slip are:
- the wrong footwear
- polished, wet or greasy floors.
In most cases, people trip on low obstacles that are hard to spot, such as:
- uneven edges in flooring
- loose mats
- open drawers
- untidy tools, or
- electrical cables.
Falls can result from a slip or trip, but many occur from low heights. For example:
- ditches, or
- wet or slippery surfaces.
WHS duties
As a person conducting a business or undertaking (PCBU), you must always aim to eliminate the risk of slips, trips and falls, so far as is reasonably practicable. If that is not possible, you must minimise risks so far as is reasonably practicable.
You must identify hazards, and assess and control risks. Think about your:
- work areas
- work procedures
- equipment.
Consulting with workers can help you find better and easier ways to identify and minimise risks. You should also review control measures to ensure they are working as planned.
Workers also have duties, including taking reasonable care for their own health and safety.
Managing risks
The best way to manage the risk of slips, trips and falls is to eliminate hazards at the design stage of the workplace.
If you can’t eliminate the risk, you must minimise it so far as is reasonably practicable.
Designing safe workplaces
In designing floors, stairs, lighting, drainage and storage:
- keep floors at a single level and use slip-resistant floor coverings
- install extra power points to avoid trip hazards from trailing cords
- ensure all areas are well lit, particularly stairwells
- have good drainage and slip resistant grates
- have lots of storage, so things aren’t left in walkways.
Safe work procedures
Work procedures can also impact on the incidence of slips, trips and falls. Have clear procedures to:
- remove rubbish to avoid trip hazards
- return tools and other items to their storage areas after use
- report and clean spills
Keep the workplace clean
All workers share responsibility for keeping the workplace clean and tidy.
Make sure you:
- have adequate rubbish and recycling bins
- have cleaning schedules in place
- dry floors after cleaning
- don’t have cords on walkway or work area floors.
Training helps workers become more aware of slip and trip hazards and helps to prevent injuries.
Training should include:
- awareness of slip and trip hazards
- identifying effective control measures
- duties of workers.
Using personal protective equipment (PPE)
As a PCBU, you should only use PPE:
- after you have implemented all other possible control measures.
- as an interim measure until you can use a better control measure
- as a backup in addition to other control measures.
Slip-resistant footwear
Slip-resistant footwear is a type of PPE.
Slip-resistant footwear should be appropriate for the work and workers must wear it properly.
In wet conditions, the shoe sole tread should:
- be deep enough to help penetrate the surface water
- make direct contact with the floor.
In dry conditions, the shoe sole tread:
- pattern should be a flat bottom construction
- should grip the floor with maximum contact area.
Types of slip-resistant footwear
Urethane and rubber soles are more slip resistant than vinyl and leather soles.
Sole materials that have tiny cell like features are slip resistant.
Supporting information
- Model Code of Practice: How to manage work health and safety risks
- Model Code of Practice: Managing the work environment and facilities
- Slips and trips at the workplace fact sheet
- The interactive safe work method statement (SWMS) tool provides information on preparing, using and reviewing SWMS for high risk construction work.
News related to this topic
01 Dec 2023 | News
Do you use labour hire?
Read more >
See all news
Further Advice
SWA is not a regulator and cannot advise you about WHS issues in the workplace. If you need help please contact your state or territory work health and safety authority .
IMAGES
VIDEO
COMMENTS
Slips, trips and falls H High risk areas for slips, trips, and falls are identified and dealt with, e.g. walkways, stairs/steps, entrances/ exits 6 Floor areas inside and outside the entrance are slip resistant when wet Higher risk slip, trip or fall periods Slips, trips and falls H Higher risk identified (e.g. during break time/1pm to
2. Identifying and assessing slip, trip and fall risks and hazards. Many causes of slips, trips and falls can be identified by being observant and vigilant of the surrounding environment. If a slip, trip or fall hazard is identified, it should be reported to the principal and/or their delegate. Common hazards include but are not limited to:
Slips, trips, and falls have far-reaching effects, affecting individuals and society. Personal i njuries range from minor cuts, bruises, sprains, and abrasions to fractures, dislocations, and head injuries (National Safety Council, 2021). The medical expenses associated with treating STF-related injuries can be substantial, including hospital stays, surgeries, rehabilitation, and ongoing care ...
The simplest way of preventing slips, trips and falls injuries in your workplace is to develop a risk management plan which identifies, assesses, controls and monitors safety hazards and risks. The following information, together with the slips, trips and falls risk management tool and worksheet at the back of this booklet, will help you
Schools; School health and safety; Slips, trips and falls ... sure they understand how they can help prevent slips and trips. Use this Slip and trip risk assessment template to make sure all hazards are effectively controlled. Publishing information. From: Health and Safety Team. Published: October 2014. Documents. Word: Slip and trip risk ...
Ask: What are the best practices for preventing slips, trips, and falls? • Practice good housekeeping. - Pick up fallen items right away. - Recognize teachers for excellent housekeeping. • Secure cords. Think about: - Taping the cord to the floor. - Securing the cord with a Velcro strip. - Using plastic or rubber cord covers.
Given this, it's best to place proper lighting in access and egress points such as halls, ramps, stairs, and exits. 3. Install safety signs. Safety signs and markers are a must in preventing slips, trips, and falls. Installing them warns people about walking in hazardous spaces to keep them safe.
associated with slips, trips and falls. Falls to a lower level accounted for 80 percent of the fatal falls. In 2017, STFs were the second leading fatal occupational injury cause, first being transportation incidents. U.S. Bureau of Labor Statistics, 2018. Causes of Slips, Trips, and Falls Hazards leading to slips, trips, and falls are often ...
Key requirements for schools to prevent and manage slips, trips and falls. Schools must: consult with school staff and HSRs to identify, manage and prevent slip, trip and fall hazards; identify slips, trips and falls hazards through observation, workplace inspections and incident reports; assess new or complex hazards using a risk assessment
Slips, Trips & Falls In 2015, the U.S. Bureau of Labor Statistics reported over 223,000 non-fatal falls on the job. The majority of those falls—149,180—were not from a height or elevation. These workers fell on the same level due to slipping on a slick surface or from tripping over a hazard in the work area. Many of these incidents resulted
School operations Slips, Trips and Falls Prevention. Policy ... Ongoing management of slips, trips and falls prevention 2. Identifying and assessing slip, trip and fall risks and hazards 3. Controlling the risks 4. Hazard, incident and near miss reporting ... Risk assessment template (DOCX) Plant and equipment risk management form ...
Slip and trip accidents in education premises happen for a number of reasons. They typically involve: members of staff or pupils/students running or carrying heavy or awkward items, wearing unsuitable footwear, poor lighting - particularly where there are uneven surfaces and changes of level. contamination - both from wet surfaces - caused ...
Trusted by thousands of schools, academies and trusts. Health and safety legislation requires schools to take steps to control slip, trip and fall risks so everyone is able to move around safely. This template identifies typical hazards and recommends control measures.
Reduce the risk of liability and costly lawsuits. Facilities ... Slips, trips, and falls are a leading cause of workplace injuries in schools, so it's essential that organizations stay vigilant and address potential hazards. Here's a checklist to help you identify problems before they cause an accident or injury.
Footwear. Footwear plays an important role in reducing the risk of slips, trips and falls. Footwear should be: suitable for the type of work and work environment. comfortable with an adequate non-slip sole and appropriate tread pattern. checked regularly to ensure treads are not worn away or clogged with contaminants.
3. Controlling the risks. Many slip, trip and fall hazards can be prevented with good housekeeping to ensure a clean and organised workplace. Some risks are more difficult to control and may need a more considered approach such as: adding extra hooks for school bags to be hung. ongoing encouragement of students to maintain good housekeeping.
The Slips Trips and Falls Risk Assessment will give you a good indication of the hazards that can contribute to slips, trips and falls, along with the risks and controls you should be thinking about. The hazards that can create slips, trips and falls include uneven surfaces, obstructions and trip hazards, spillages, wet surfaces, poor flooring ...
The risk assessment includes all necessary control measures to eliminate or minimise the risks of slips, trips and falls in their School/Unit; All relevant staff are made aware of the risk assessment. The annual School/Unit workplace health and safety inspection checklist includes a section on slips, trips and falls hazards. Further Information ...
Housekeeping. Good housekeeping is the first and the most important (fundamental) level of preventing falls due to slips and trips. It includes: cleaning all spills immediately. marking spills and wet areas. mopping or sweeping debris from floors. removing obstacles from walkways and always keeping walkways free of clutter.
Employee & employer attitude - A positive attitude toward slips and trips is needed. When it comes to contamination and housekeeping, all need to have a 'see it sort it' mentality, rather than a 'leave it to someone else' attitude. play a big part of contamination control, the right system, at the right time to be carried out safely.
Key requirements for schools to prevent and manage slips, trips and falls. Schools must: consult with school staff and HSRs to identify, manage and prevent slip, trip and fall hazards; identify slips, trips and falls hazards through observation, workplace inspections and incident reports; assess new or complex hazards using a risk assessment
Falls can result from a slip or trip, but many occur from low heights. For example: steps stairs kerbs, holes ditches, or wet or slippery surfaces. WHS duties As a person conducting a business or undertaking (PCBU), you must always aim to eliminate the risk of slips, trips and falls, so far as is reasonably practicable.